⚡ EV Support Hub← Back to Tech Guides
EV Technology · Technical Education

Physics Laws and Principles Used in Electric Vehicles

A practical reference to electrical laws, electromagnetism, battery electrochemistry, vehicle motion, thermodynamics and cooling principles used in EV engineering.

52 laws and principles covered in this guide

Browse the complete list below. Select any topic to jump to its explanation, EV applications and relevant formulas.

Introduction

Electric vehicles (EVs) operate using several fundamental laws of physics and engineering principles. These principles explain how electrical energy is stored in batteries, converted into mechanical energy by electric motors, transmitted to the wheels and recovered through regenerative braking.

From battery electrochemistry and electromagnetic induction to vehicle dynamics and thermal management, different scientific principles work together to make electric vehicles efficient, reliable and practical.

Understanding these principles helps EV technicians, engineers, students and enthusiasts understand vehicle operation, diagnose technical problems and improve overall vehicle performance.

This guide covers the major physics laws and principles used in electric vehicles, along with their explanations, practical applications and important formulas.

1. Electrical Laws and Principles

Electrical laws form the foundation of EV electrical systems. They explain the relationship between voltage, current, resistance, power and energy.

1.1 Ohm's Law

Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it, provided the temperature and other physical conditions remain constant.

V=I×R

Where:

Application in EV:

1.2 Kirchhoff's Current Law (KCL)

The total current entering an electrical junction is equal to the total current leaving that junction.

Application in EV:

1.3 Kirchhoff's Voltage Law (KVL)

The algebraic sum of all voltage changes around a closed electrical circuit is zero.

∑V=0

Application in EV:

1.4 Joule's Law of Heating

When electric current flows through a resistance, electrical energy is converted into heat.

Where:

Application in EV:

1.5 Electrical Power Law

Electrical power is the rate at which electrical energy is transferred or converted.

P=V×I

Application in EV:

1.6 Electrical Energy Principle

Electrical energy is the total amount of electrical power transferred over a period of time.

E=P×t

Application in EV:

1.7 Coulomb's Law

Coulomb's Law describes the electrostatic force of attraction or repulsion between two electric charges.

Application in EV:

1.8 Law of Conservation of Electric Charge

Electric charge cannot be created or destroyed. The total electric charge in an isolated system remains constant.

Application in EV:

2. Electromagnetism and Magnetic Principles

Electromagnetic principles are fundamental to electric motor operation, power conversion, transformers and regenerative braking.

2.1 Fleming's Left-Hand Rule

Fleming's Left-Hand Rule determines the direction of force acting on a current-carrying conductor placed in a magnetic field.

Application in EV:

2.2 Fleming's Right-Hand Rule

Fleming's Right-Hand Rule determines the direction of induced current when a conductor moves through a magnetic field.

Application in EV:

▶ Open interactive 3D demonstration of Fleming's Left-Hand and Right-Hand Rules

2.3 Faraday's Law of Electromagnetic Induction

Faraday's Law states that a change in magnetic flux linked with a conductor or coil induces an electromotive force (EMF).

E=−N

Where:

Application in EV:

2.4 Lenz's Law

Lenz's Law states that the direction of induced current is such that its magnetic effect opposes the change in magnetic flux that produces it.

Application in EV:

2.5 Lorentz Force Law

A charged particle experiences a force due to electric and magnetic fields. The magnetic component acts on moving charges.

F=q(E+v×B)

Where:

Application in EV:

2.6 Ampere's Circuital Law

Ampere's Circuital Law relates the magnetic field around a closed path to the electric current passing through the enclosed area.

Application in EV:

2.7 Biot-Savart Law

The Biot-Savart Law describes the magnetic field produced by a small segment of a current-carrying conductor.

Application in EV:

2.8 Maxwell's Equations

Maxwell's Equations are four fundamental equations describing the relationship between electric fields, magnetic fields and electric currents.

Application in EV:

2.9 Electromagnetic Induction

Electromagnetic induction is the phenomenon of generating an EMF when the magnetic flux linked with a conductor or coil changes. Faraday's Law mathematically describes this phenomenon.

Application in EV:

2.10 Magnetic Hysteresis

Magnetic hysteresis describes the lag of magnetic flux density behind the applied magnetic field strength in a magnetic material.

Application in EV:

2.11 Eddy Current Principle

A changing magnetic field induces circulating electrical currents inside a conductive material. These currents are called eddy currents and can produce heat and energy losses.

Application in EV:

2.12 Skin Effect

Skin effect is the tendency of alternating current to flow more near the surface of a conductor, particularly at higher frequencies.

Application in EV:

3. Battery and Electrochemical Principles

Battery electrochemistry explains how EV batteries store chemical energy and convert it into electrical energy.

3.1 Electrochemical Principles

Electrochemical principles describe the conversion between chemical energy and electrical energy through chemical reactions involving the transfer of electrons and ions.

Application in EV:

3.2 Nernst Equation

The Nernst Equation describes how the electrode potential of an electrochemical cell changes depending on ion concentration, temperature and reaction conditions.

Where:

Application in EV:

3.3 Arrhenius Equation

The Arrhenius Equation describes how the rate of a chemical reaction changes with temperature.

k=Ae

Where:

Application in EV:

3.4 Law of Conservation of Energy

Energy cannot be created or destroyed; it can only be converted from one form into another.

Application in EV:

3.5 Law of Conservation of Mass

In a chemical reaction, mass is conserved. The total mass of the reactants equals the total mass of the products in a closed system.

Application in EV:

4. Mechanics and Vehicle Motion Laws

Mechanical principles explain how an EV accelerates, moves, produces torque, handles road conditions and stops.

4.1 Newton's First Law of Motion (Law of Inertia)

An object remains at rest or continues moving at a constant velocity unless acted upon by an external force.

Application in EV:

4.2 Newton's Second Law of Motion

The acceleration of an object depends on the net force acting on it and its mass.

F=ma

Application in EV:

4.3 Newton's Third Law of Motion

For every action, there is an equal and opposite reaction.

Application in EV:

4.4 Newton's Law of Universal Gravitation

Every object attracts every other object with a gravitational force.

Application in EV:

4.5 Work-Energy Theorem

The net work done on an object equals the change in its kinetic energy.

=ΔKE

Application in EV:

4.6 Law of Conservation of Momentum

The total momentum of an isolated system remains constant when no external force acts on it.

p=mv

Application in EV:

4.7 Friction Laws

Friction is the force that opposes relative motion between surfaces in contact.

Application in EV:

4.8 Rotational Motion Principles

Rotational motion describes the movement of an object around an axis and the relationship between torque, angular velocity and rotational acceleration.

Application in EV:

4.9 Power and Torque Relationship

Mechanical power in a rotating system depends on the torque produced and its angular velocity.

P=Tω

Where:

Application in EV:

4.10 Centripetal Force Principle

An object moving in a circular path requires an inward-directed force towards the centre of that path.

Application in EV:

4.11 Drag Force Principle

Aerodynamic drag is the resistance experienced by a vehicle as it moves through air. It increases with the square of vehicle speed under ordinary road conditions.

Where:

Application in EV:

4.12 Rolling Resistance Principle

Rolling resistance is the force that opposes the movement of a rolling tyre due to tyre deformation and other energy losses.

Where:

Application in EV:

4.13 Bernoulli's Principle

Bernoulli's Principle states that in ideal fluid flow, an increase in fluid velocity is associated with a decrease in static pressure along a streamline.

Application in EV:

5. Thermodynamics and Heat Transfer

Thermal principles help maintain the operating temperature of EV batteries, motors, inverters and other electrical components.

5.1 First Law of Thermodynamics

The change in internal energy of a system equals the heat supplied to it minus the work done by the system.

ΔU=Q−W

Application in EV:

5.2 Second Law of Thermodynamics

The entropy of an isolated system cannot decrease. Energy conversion processes have limitations and are accompanied by irreversible losses.

Application in EV:

5.3 Fourier's Law of Heat Conduction

Heat flows through a material from a higher-temperature region to a lower-temperature region.

=−kA

Application in EV:

5.4 Newton's Law of Cooling

The rate of heat transfer between an object and its surrounding fluid depends on the temperature difference between them.

=hA(T

Application in EV:

5.5 Stefan-Boltzmann Law

The Stefan-Boltzmann Law describes the thermal radiation emitted by an ideal blackbody based on its absolute temperature.

P=σAT

Application in EV:

5.6 Ideal Gas Law

The Ideal Gas Law describes the relationship between pressure, volume, temperature and the quantity of an ideal gas.

PV=nRT

Application in EV:

5.7 Heat Capacity Principle

Heat capacity is the amount of heat energy required to raise the temperature of a substance by a given amount.

Q=mcΔT

Application in EV:

6. Fluid Mechanics and Cooling Systems

Fluid mechanics explains the movement of liquids and gases through EV cooling and other vehicle systems.

6.1 Pascal's Law

Pressure applied to an enclosed fluid is transmitted equally in all directions throughout the fluid.

Application in EV:

6.2 Continuity Equation

The mass flow rate of a fluid remains constant through a flow system when there is no accumulation or leakage.

Application in EV:

6.3 Hagen-Poiseuille Law

Describes the relationship between pressure difference, flow rate and resistance to laminar fluid flow through a cylindrical pipe.

Application in EV:

7. Additional Electrical and Thermal Principles

7.1 Magnetic Flux

Magnetic flux represents the total magnetic field passing through a specified surface.

Application in EV:

7.2 Magnetic Hysteresis Loss

Magnetic hysteresis loss occurs when magnetic materials are repeatedly magnetised and demagnetised during alternating magnetic field operation.

Application in EV:

7.3 Eddy Current Loss

Eddy current losses occur due to circulating currents induced inside conductive materials by changing magnetic fields.

Application in EV:

7.4 Skin Effect

Alternating current tends to concentrate near the surface of a conductor at higher frequencies.

Application in EV:

8. EV Components and Their Related Physics Principles

The table below connects common electric-vehicle components with the scientific principles involved in their operation. The exact principles used depend on the vehicle design.

EV Component / SystemRelated laws and principles
HV BatteryElectrochemistry, Nernst Equation, Arrhenius Equation, Conservation of Energy
Battery Management System (BMS)Ohm's Law, Kirchhoff's Laws, Electrochemical Principles
Electric MotorLorentz Force, Faraday's Law, Ampere's Circuital Law, Electromagnetic Principles
InverterElectrical Power, Ohm's Law, Kirchhoff's Laws, Joule's Law
DC-DC ConverterElectromagnetic Induction, Faraday's Law, Electrical Power
On-Board Charger (OBC)Electromagnetic Induction, Power Principles, Electrical Circuit Laws
Regenerative BrakingFaraday's Law, Lenz's Law, Conservation of Energy
HV Cables and ConnectorsOhm's Law, Joule's Law, Skin Effect
Battery Cooling SystemThermodynamics, Fourier's Law, Newton's Law of Cooling, Fluid Mechanics
Air Conditioning SystemThermodynamics, Ideal Gas Law, Heat Transfer
Gearbox and DifferentialRotational Motion, Torque and Power Principles
Tyres and WheelsFriction, Rolling Resistance, Newton's Laws
Vehicle AccelerationNewton's Laws, Work-Energy Theorem
Vehicle AerodynamicsFluid Mechanics, Aerodynamic Drag; Bernoulli's Principle is relevant to idealised fluid-flow analysis
Hydraulic BrakingPascal's Law, Friction
Vehicle StabilityNewton's Laws, Centripetal Force
Wireless ChargingFaraday's Law, Electromagnetic Induction

9. Important Formulas Used in EV Engineering

These standard formulas help explain and calculate electrical, mechanical and thermal parameters used in electric vehicles. Check the stated conditions and units when applying them.

ParameterFormula
Voltage (Ohm's Law)V = I × R
Electrical Power (DC)P = V × I
Electrical Energy (constant power)E = P × t
Resistive Heat Generation (Joule's Law)Q = I² × R × t
Mechanical Power (rotating shaft)P = T × ω
Force (Newton's Second Law)F = m × a
Kinetic EnergyKE = ½ × m × v²
Gravitational Potential EnergyPE = m × g × h
Aerodynamic DragFᵈ = ½ × ρ × Cᵈ × A × v²
Rolling Resistance (level road approximation)Fᵣᵣ = Cᵣᵣ × m × g
Centripetal ForceFᶜ = m × v² ÷ r
Lorentz ForceF = q(E + v × B)
Faraday's Law of Inductionε = −N × (dΦ/dt)
Heat Transfer (specific heat capacity)Q = m × c × ΔT
Gravitational ForceF = G × (m₁ × m₂) ÷ r²
Formula notes: V is voltage, I is current, R is resistance, P is power, E is energy, t is time, T is torque, ω is angular velocity, m is mass, a is acceleration, v is speed, ρ is air density, Cᵈ is drag coefficient, A is frontal area, Cᵣᵣ is rolling-resistance coefficient, r is radius or separation as applicable, q is electric charge, B is magnetic flux density, Φ is magnetic flux, N is the number of turns, c is specific heat capacity and ΔT is temperature change. For aerodynamic drag, the usual equation assumes air density and drag coefficient are appropriately defined. The rolling-resistance expression is an approximation for a level road.

10. Conclusion

Electric vehicles are built on the combined application of several fundamental physics laws and engineering principles. No single law explains the complete operation of an EV.

Electrochemical principles enable batteries to store and release energy, electromagnetic principles allow motors to produce torque, electrical laws govern power distribution, and mechanical principles explain vehicle movement.

Thermodynamics and fluid mechanics help maintain the operating temperature of critical components, while regenerative braking enables the recovery of a portion of the vehicle's kinetic energy.

Understanding these scientific principles provides a strong technical foundation for EV technicians, engineers, students and electric vehicle enthusiasts.

Electric vehicles are a practical application of physics, electrical engineering, mechanical engineering and electrochemistry working together.

Technical editorial notes

The following points are important for maintaining scientific accuracy on your website:

Fleming's rules are direction-finding rules, not independent physical laws.
Electromagnetic induction is a phenomenon described by Faraday's Law.
Joule's Law describes resistive heating; it is not the only source of heat in an EV battery.
Regenerative braking does not recover all the energy used for acceleration. Conversion losses and other vehicle losses remain.
Lorentz Force Law applies to both electric and magnetic fields.
Bernoulli's Principle is an idealised fluid-flow relationship, not a direct explanation of all vehicle aerodynamic drag.
The Nernst Equation and Arrhenius Equation are important in electrochemical modelling, but they do not independently describe the complete behaviour of a battery.
The listed principles are not all equally relevant to every EV design.